FOXBORO P0961CA Analog output board

This will provide a low impedance path to earth at the lower frequencies. Materials used for stringers and pedestal heads are steel and aluminum. In general, the grounding aspects of raised flooring have been excellent. (d) Problem areas that designers and installers should be aware of are inadequate bonded joints between pedestal heads due to oxidized dirty pedestal heads when installed, use of poor bolting hardware (speed nuts, sheet metal screws), or bolting hardware not installed or not properly tightened. Composite bonds between cabinet chassis and the raised floor shall not exceed a specified resistance value, a pedestal head to stringer resistance will read about 40 micro-ohms and should not exceed 100 micro-ohms.

usually 1 milliohm. Typically

Typically, a pedestal head to stringer resistance will read about 40 micro-ohms and should not exceed 100 micro-ohms.Connections from the equipment racks and the earth electrode subsystem to the floor are important. Clamps, if used, should be installed on the upper pedestal assembly to avoid the relatively high resistance between the lower assembly (that has the base) and the upper column.

About our company

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/