EMERSON KJ1710X1-BA1 Single port optical switch

RED/BLACK equipment. Specific requirements concerning the installation of RED/BLACK equipment is contained in MIL-HDBK-232A, Red/Black Engineering-Installation Guidelines. This manual will provide the general requirements expected to provide interference protection for signals generated from these installations. (1) Physical barriers should be provided at the perimeter of the facility to ensure that the earth electrodes are not degraded or tapped, or that pickup devices are not introduced into the system. (2) Each RED/BLACK facility should use a facility entrance plate with all conductors entering the facility passing through this plate. The entrance plate should extend approximately one foot from the nearest conduit or cable penetrations. All signal cables entering the facility should be shielded, with the shield circumferentially bonded to the plate.

About our company

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/