EMERSON KJ3001X1-BJ1 Analog output module

If holes through the shield are necessary, determine the optimum size and spacing. (e) Use honeycomb for the shielding of ventilation ports wherever possible. (f) Peripherally bond metallic utility lines to the shield at the point of entrance. Non-metallic lines entering through waveguide-below-cutoff ducts or tubes may also be used for water, gas, compressed air, etc. (g) Cover all openings required for visual access with wire screen or conductive glass. Ensure that the screen or glass is carefully bonded to the enclosure around the perimeter of the opening. (h) Doors should be metal with solid, uniform contact around the edges. Wire mesh gaskets or finger stock should be provided. (i) For large shielded enclosures where high traffic volume is expected, consider the use of waveguide-below-cutoff hallways.

About our company

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/