ABB SDCS-CON-4 3ADT313900R1501 DC governor main board

Paint or metallic platings used for the purpose of excluding moisture or to provide a third metal compatible with both bond members should be applied with caution. When they are used, both members must be covered. Covering the anode alone must be avoided. If only the anode is covered, then at imperfections and breaks in the coating corrosion will be severe because of the relatively small anode area. All such coatings must be maintained in good condition. c. Entry plates. All metallic penetrations of the facility shielding should enter at a common location, and all shielded cables, conduits, and pipes should be bonded to an entry plate. This plate should be large enough so that no penetrations will occur within 1 foot of the nearest edge.

About our company

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/