The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

VME-7807RC VME-7807RC-410000 Gas turbine module

Furthermore, they must be trained, instructed and qualified to switch electrical circuits and equipment on and off in accordance with technical safety regulations, to ground them and to mark them according to the requirements of safe work practices. They must have adequate safety equipment and be trained in first aid. • Only use spare parts and accessories approved by the manufacturer. • Follow all safety regulations and requirements for the specific application as practiced in the country of use. • The equipment is designed for installation in industrial machinery. • The ambient conditions given in the product documentation must be observed. • Use only safety features and applications that are clearly and explicitly approved in the Project Planning Manual. For example, the following areas of use are not permitted: construction cranes, elevators used for people or freight, devices and vehicles to transport people, medical applications, refinery plants, transport of hazardous goods, nuclear applications, applications sensitive to high frequency, mining, food processing, control of protection equipment (also in a machine).

• The information given

 in this documentation with regard to the use of the delivered components contains only examples of applications and suggestions. The machine and installation manufacturer must - make sure that the delivered components are suited for his individual application and check the information given in this documentation with regard to the use of the components, - make sure that his application complies with the applicable safety regulations and standards and carry out the required measures, modifications and complements. • Startup of the delivered components is only permitted once it is sure that the machine or installation in which they are installed complies with the national regulations, safety specifications and standards of the application. • Operation is only permitted if the national EMC regulations for the application are met. The instructions for installation in accordance with EMC requirements can be found in the documentation "EMC in Drive and Control Systems.” The machine or installation manufacturer is responsible for compliance with the limiting values as prescribed in the national regulations. • Technical data, connections and operational conditions are specified in the product documentation and must be followed at all times

Protection Against Contact

Touching live parts with voltages of 50 Volts and more with bare hands or conductive tools or touching ungrounded housings can be dangerous and cause electric shock . In order to operate electrical equipment, certain parts must unavoidably have dangerous voltages applied to them. DANGER High electrical voltage! Danger to life, severe bodily harm by electric shock! ⇒ Only those trained and qualified to work with or on electrical equipment are permitted to operate, maintain or repair this equipment. ⇒ Follow general construction and safety regulations when working on high voltage installations. ⇒ Before switching on power the ground wire must be permanently connected to all electrical units according to the connection diagram. ⇒ Do not operate electrical equipment at any time , even for brief measurements or tests,if the ground wire is not permanently connected to the points of the components provided for this purpose. ⇒ Before working with electrical parts with voltage higher than 50 V, the equipment must be disconnected from the mains voltage or power supply. Make sure the equipment cannot be switched on again unintended.