ABB DSQC345A 3HAB8101-1 I/O module

ABB DSQC345A 3HAB8101-1 I/O module

For the part numbers of the serial interface modules, refer to Table 2-1. The part numbers are ordinarily printed on the primary side (top) of the SIMs, but may be found on the secondary side in some versions. If you need to replace an existing serial interface module with a SIM of another type, go to Removal of Existing SIM below. If there is no SIM on the main board, skip to Installation of New SIM.Removal of Existing SIM 1. Each serial interface module is retained by two 4-40 x 3 /16 ” Phillips-head screws in opposite corners. Remove the two screws and store them in a safe place for later use. 2. Grasp opposite sides of the SIM and gently lift straight up. Caution Avoid lifting the SIM by one side only, as the connector can be damaged on the SIM or the main board. 3. Place the SIM in a static-safe container for possible reuse

Company advantages

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/