ABB DSQC266T 3HAB8802-1 Control switching value

ABB DSQC266T 3HAB8802-1 Control switching value

The MPCR, located at shared RAM location of $800 offset from the base address the debugger loads it at, contains one of two longwords used to control communication between processors. The MPCR contents are organized as follows:The status codes stored in the MPCR are of two types: ❏ Status returned (from the monitor) ❏ Status set (by the bus master) The status codes that may be returned from the monitor are:HEX 0 (HEX 00) -- Wait. Initialization not yet complete. ASCII E (HEX 45) - Code pointed to by the MPAR address is executing. ASCII P (HEX 50) - Program Flash Memory. The MPAR is set to the address of the Flash memory program control packet. ASCII R (HEX 52) - Ready. The firmware monitor is watching for a change

Company advantages

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/