ABB IMPCC01 Module controller card

ABB IMPCC01 Module controller card

Place one jack screw as indicated in Figure 2-10. 7. While holding the screw in place, insert the lock washer and then the nut. Notice that you might need long-nose pliers to insert the washer and nut. 8. Tighten the nut by firmly holding it and rotating the jack screw. 9. Repeat steps 6 through 8 for the second jack screw. 10. Place the module cover back in place and tighten the grounding screw. 11. Slide the module back in place. 12. Connect the connector and shell to your module connector and hold the connector and shell in place by tightening both mounting screws.Terminal Block The terminal block consists of a shielded board with supports to connect to the SCXI-1140 front signal connector.There are twenty screw terminals for easy connection. Eight pairs of screw terminals are dedicated for signal connection to the eight differential inputs of the SCXI-1140, two screw terminals connect to AGND, and one pair of screw terminals connects to the HOLDTRIG digital signal and DGND

Company advantages

1.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

2.Application industries: widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/