The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

TRICONEX DI 3506X isolation module

The “ESC” control key brings you one level up in the menu structure. To open the configuration menu, press the key combination “ENT” and “ESC”. The configuration mode is structured by levels. The first level contains the various main terms, under which further sub-headings and setting options are grouped together. Depending on the selection options, a main term can contain up to 4 sublevels. The following graphic illustrates the interrelationships of the menu levels

How to change from the operation mode to the configuration mode “EDIT Parameters”: Precondition: You are in the operation mode. The display shows as running text the manufacturer’s name and the version number of the control electronics or a text determined individually by you. ▶ Press the “Enter” control key and hold it depressed (for at least 2 seconds) until “EDIT Parameters” is shown on the display of the control electronics.

The control electronics

 is in the configuration mode “EDIT Parameters”. How to change from the operation mode to the configuration mode: Precondition: You are in the operation mode. The display shows as running text the manufacturer’s name and the version number of the control electronics or a text determined individually by you. ▶ Press the control keys “ENT” and “ESC” simultaneously (exception: for “EDIT Parameters“, see above) and hold them down (for at least 2 seconds) until “Setup” is shown on the display of the control electronics. The control electronics is now in the setup mode. How to exit the configuration mode: In the present example, the second level of the menu tree “Setup” was selected. The display of the control electronics shows “Sprache/Language” as running text. ▶ Press the “ESC” control key. The display shows “Setup” as running text. ▶ Press the control key “ESC”. The display shows as running text the manufacturer’s name and the version number of the control electronics or a text determined individually by you.

Configuration example 

The menu tree “Parameters” was selected in this example. 5. Press the control keys “ENT” and “ESC” simultaneously and hold them down (for at least 2 seconds) until “Setup” is shown on the display of the control electronics. The control electronics is now in the configuration mode.

If no entry is made within a minute in the configuration mode, the control electronics automatically changes to the next higher level until the operation mode is reached. The control electronics VT-VPCD is fully operable in the configuration mode. How to change a parameter with the help of the control keys: CAUTION! Uncontrolled system behavior! When parameters are changed with the help of the control keys of the control electronics, the entries are not checked for the signal “enable active”. ▶ Do not change one or several analog inputs from voltage to current or from current to voltage. When you change the type of one or several analog inputs, the active value is not interpreted as desired.