Agilent 86120B PC calibration of optical wavelength meter

Agilent 86120B PC calibration of optical wavelength meter

Agilent 86120B PC calibration of optical wavelength meter

If an interrupt is generated by a timer, the source of the interrupt may be determined by reading the “Timer x Caused IRQ” fields. If the field is set to “1”, then the respective timer caused the interrupt. Note that multiple timers can cause a single interrupt. Therefore, the status of all timers must be read to ensure that all interrupt sources are recognized. A particular timer interrupt can be cleared by writing a “0” to the appropriate “Timer x Caused IRQ” field. Alternately, a write to the appropriate Timer x IRQ Clear (TxIC) register will also clear the interrupt. When clearing the interrupt using the “Timer x Caused IRQ” fields, note that it is very important to ensure that a proper bit mask is used so that other register settings are not affected. The preferred method for clearing interrupts is to use the “Timer x IRQ Clear” registers described below

Professional team

1.Our large inventory contains current and obsolete products. For all outdated and legacy automation, our internal team tests every part before shipment, and all parts sold by AMIKON are actually in stock, which makes emergency transportation a simple solution to solve the emergency shutdown situation.

2.In the automation industry, if you are looking for new surplus products or discontinued parts, our knowledgeable and friendly colleagues can help you get what you need. With our competitive price, we will be proud to provide you with the required parts inventory

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/