ADEPT 30340-40000 Relay input module

Mount the PMAC II Solo in a central location such as a motor or electrical room. The panel should be in an area where there is plenty of ventilation (e.g., not in a closet). Keep a 6-12 inch clearance on the top and bottom for proper air flow. The room’s ambient temperature should always be below 100° F.

Indoor Temperature Sensor  

The indoor temperature sensor should be mounted in a central location—within the zone to be measured—away from doors, windows, vents, heaters, and outside walls that could affect temperature readings. The sensor should be between four and six feet from the floor. In addition, the sensor should not be mounted above other sensors that generate heat during operation (such as relative humidity sensors). To mount the sensor, use a screwdriver to press in the tab on the left side of the sensor enclosure, and lift the cover off the enclosure. Use the two mounting holes on the back panel to screw the sensor enclosure onto a flat surface

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, price concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/