ADEPT 30430-20000 Voltage module

Additional setup steps required are: 

1. Wire the indoor air temperature sensor and indoor relative humidity sensor to the terminal strip at the bottom of the panel. 

2. Program the high and low dewpoint setpoints from the UC12PG-R controller’s front panel.

Indoor Relative Humidity Sensor 

The indoor relative humidity (RH) sensor should be mounted in a central location within the zone to be measured, away from doors, windows, vents, heaters, and outside walls that could affect humidity readings. The Sensor should be between four and six feet from the floor. Note that the RH sensor generates a small amount of heat; therefore, do not mount temperature sensors directly above RH sensors

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, price concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/