ADEPT 90400-60111 Line interface module

The PMAC II Solo keypad allows the user to navigate through all the status and configuration screens and to adjust setpoints. The keypad has a four-line display and six buttons, and can display up to 20 characters on each line. To exit a screen without saving or to cancel an operation, press the button. The button allows you to select, enter information, or save changes into the controller.

1. UC12PG-R Output Mapping

The PMAC II Solo uses these setpoint values as shown in the graph in Figure 1-10. When the dewpoint is at or below the Minimum Dewpoint setpoint, the heaters will operate at the percentage specified in the Minimum Pulse Percentage setpoint. When the dewpoint is between the minimum and maximum setpoint, the PMAC II Solo’s pulse percentage varies between the Minimum Pulse Percentage and 100% (the higher the dewpoint, the higher the pulse percentage). Finally, if the dewpoint meets or exceeds the Maximum Dewpoint setpoint, the heaters will operate at 100%.

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, price concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/