RELIANCE 0-52807 Channel input card

The number of resistors connected in series depends on the resistor type. The thermal sensor is not mounted on the attached regenerative resistor. An abnormal heating of resistor may be generated at a regenerative circuit failure. Install a thermal sensor near the resistor and establish a protective circuit to shut off the main circuit power supply when abnormal heating occurs. The detection level of the thermal sensor varies according to the settings of the resistor. Set the thermal sensor in the most appropriate position on your design basis, or use the thermal sensor built-in regenerative option. (MR-RB5E, MR-RB5R, MR-RB9P, MR-RB9F, MR-RB9T, MRRB5K-4, MR-RB6B-4, MR-RB60-4, or MR-RB6K-4)

MR-J4-11KB-RZ020 to MR-J4-22KB-RZ020

MR-J4-11KB4-RZ020 to MR-J4-22KB4-RZ020 (when using the regenerative option) MR-J4-11KB-RZ020 to MR-J4-22KB-RZ020/MR-J4-11KB4-RZ020 to MR-J4-22KB4-RZ020 servo amplifiers are not supplied with regenerative resistors. When using any of these servo amplifiers, always use the MR-RB5E, MR-RB5R, MR-RB9P, MR-RB9F, MR-RB9T, MR-RB5K-4, MR-RB6B-4, MR-RB60-4, or MR-RB6K-4. Cooling the regenerative option with cooling fans improves regenerative capability. G3 and G4 are terminals for thermal sensor. Between G3 and G4 is opened when the regenerative option overheats abnormally.

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, p

rice concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/