GE IS200TVBAH2ACC MRP646218 Pulse input card

The chassis provides a 3-pin relay dry contact located at the rear panel of the chassis for signaling of a power failure. The relay output can be connected to an alarm signaling device. The relay alarm will be triggered when the system power falls below 10.8VDC. The relay logic will apply for both single and dual power operation. Current is 0.6 Amps at 30VDC.

Each bay is equipped with a holding tray

secured to the chassis by a retaining screw. To install a media converter or Ethernet extender into a chassis bay: 1) Loosen the retaining screw and pull the holding tray out. 2) Fit the component into the holding tray. 3) Slide the holding tray into the bay. 4) Tighten the retaining screw to secure the holding tray and component in place.

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/