WOODWARD 9905-797 Switch input module

The power supply module should be disconnected from the external power source before it is installed into the chassis. 1) Loosen the two cap screws on the sides of the power supply module, and use the handle to slide the module out of the slot. 2) Carefully slide the new power supply module into the slot so that the outer face of the power supply module is flush with the rear face of the chassis. 3) Tighten the two cap screws to secure the power supply module in place. 4) Connect the power supply module to an external power source.

The Accessory 8E for the PMAC2 

family of controllers provides the pinouts for 2 axes with analog-input amplifiers. The amplifiers can be velocity-mode, torque-mode, or sinusoidal input mode (2 analog commands); or any mix of the above. The ACC-8E board has a single flat-cable connection to the PMAC2. All of the main signals to and from the machine can be wired through modular removable terminal blocks. Alternatively, many signals can be connected to the machine through flat cables via on-board IDC headers.

About us

We are professional company and we are expert in this business, we have highly experienced production team, or sales team, or purchase team, we have most advanced production line. We are reputable in the market

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/