The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

NDCU-12C NDCU-12CK processor module

The central unit 07 KR 91 works either as
bus master in the decentralized automation system ABB Procontic CS31 or as
slave (remote processor) in the decentralized automation system ABB Procontic CS31 or as
stand–alone central unit. The module is provided in two versions with supply voltages of 24 V DC and 115/ 230 V AC: 07 KR 91 R202: The device has a 115/230 V AC power supply voltage. It provides a 24 V output voltage for the supply of its own binary inputs. 07 KR 91 R252: The device has a 24 V DC power supply voltage. It is provided with an additional interface for connecting communication modules (e.g. 07 KP 90). Main features
20 binary inputs
12 binary relay outputs
1 counting input for counting frequencies up to 10 kHz

1 CS31 system bus interface for system expansion
Serial interface COM1 – is set as programming interface – can be set as an ASCII interface for connecting peripheral devices (e.g. MMC devices)

Real–time clock

 LEDs for displaying the binary input and output signals as well as operating conditions and error messages
Detachable screw–type terminal blocks
Detachable plastic sheet on the front side of the device; can be labelled with the signal names in order to have the inputs and outputs directly assigned
Fastening by screws or by snapping the device onto a DIN rail
The lithium battery 07 LE 90 can be put into the battery compartment in order to – store and back-up the user program in the RAM – store and back-up data which is additionally contained in the RAM, e.g. the status of flags – back-up the time and date (real–time clock)
RUN/STOP switch for starting and aborting the program execution
Extensive diagnosis functions – Self–diagnosis of the central unit – Diagnosis of the ABB Procontic CS31 system bus and the connected modules

Central Unit 07 KT 92 R202

The central unit 07 KT 92 works either as
bus master in the decentralized automation system ABB Procontic CS31 or as
slave (remote processor) in the decentralized automation system ABB Procontic CS31 or as
stand–alone central unit. The module is supplied by 24 V DC. It is provided with an additional interface for connecting communication modules (e.g. 07 KP 90). The module 07 KT 92 R262 is additionally provided with an integrated ARCnet coupler (and an ARCnet interface). Main features
12 binary inputs
8 binary transistor outputs
4 analog inputs
2 analog output
1 counting input for counting frequencies up to 50 kHz
1 CS31 system bus interface for system expansion
Serial interface COM1 – is set as programming interface – can be set as an ASCII interface for connecting peripheral devices (e.g. MMC devices)
Serial interface COM2 as an MMC interface
Real–time clock
LEDs for displaying the binary input and output signals as well as operating conditions and error messages
Detachable screw–type terminal blocks
Detachable plastic sheet on the front side of the device; can be labelled with the signal names in order to have the inputs and outputs directly assigned
Fastening