BOSCH  LTE12 0.6KVA Thermocouple module

To support cross connection between services and network IP interfaces, the network interface port command has been augmented to allow the binding of the IP interface to a ccag cc-id. Similar to service CCAG SAPs, the network IP interface port binding command must reference the ccagid, the CCA path (.a or .b) and the cc-id used by the service CCAG SAP on the other CCA path. Use the following CLI syntax to configure CCAG a network IP interface.

Cross Connecting Services 

Services are provisioned onto a CCAG using a special CCAG SAP definition. CCAG SAPs must reference a ccag-id, a CCA path (a or b), a pairing type (sap-sap or sap-net) and a unique cc-id. The ccag-id identifies the group of CCAs that will be used for forwarding packets associated with the SAP. The path identifies the bandwidth control grouping used to manage CCA egress bandwidth. The pairing type helps the system identify which buffering resources will be used to manage egress queuing of packets. Finally, the cc-id is used to explicitly cross connect the SAP to another SAP or network IP interface configured with the same cc-id.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/