CABLETRON 90001666-03 Speed module
This command adds and deletes provisioned CCAs from the CCAG. The only requirement to defining a CCA member is that the defined MDA position be provisioned as type cca. A CCA does not need to be populated in the defined MDA position prior to membership definition. A nonpopulated CCA member is considered inactive from a CCAG perspective. A populated CCA member will become active once it has been initialized by the system. A CCA member may be removed from the CCAG or depopulated from MDA slot at any time. At least one member CCA must be active on the CCAG for the CCAG to be placed in the operational state. Up to 8 member CCAs can be configured per CCAG.
The no form of the command removes a CCA member from the CCAG.
If the CCA does not exist or is not currently a member of the CCAG, no error is returned. Once removed from the CCAG, all forwarding through the specified CCA stops. Parameters card-slot/mda-number — Identifies the system MDA slot that is will be added as a member CCA for the CCAG. The specified MDA slot must have been pre-provisioned as type cca for the membership command to be successful. card-slot — Defines the IOM slot the provisioned CCA is or will be populated. It is separated from the following mda-position portion of the parameter by a forward slash (/). Values 1 through 10 (chassis type dependent)
----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------
PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module
Network communication module,
Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output
Module, redundancy module, power module, relay output module, relay input module, processor module
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/