CTI 2500-RBC 901E-2500-RBC Output logic module

CTI 2500-RBC 901E-2500-RBC Output logic module

According to the technical choices on the power conversion system, the Brayton Cycle can be started by using the generator as a motor. This solution implies having a direct link of the generator with turbine and compressor. With a view to drive the generator as a motor, a Synchronous Frequency Converter must be used. This system will control the speed of the lineshaft. It will drive it up to the speed when the turbine can sustain the lineshaft. The speed will then increase up to nominal. The generator can then be connected to the grid (synchronisation).

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

The frequency converter 

can be used when stopping the unit: the speed can be controlled according to appropriate stages of deceleration and to help core cooling. Finally, it can also stop the lineshaft acting as a brake. Fig 1, 2a and 2b illustrate a simplified schematic single line diagram and the associated starting sequence, both established for the General Atomics/ GT-MHR project.

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/