DANAHER T114-0002 XMP-SYNQNET-PCI-RJ Digital output module

DANAHER T114-0002 XMP-SYNQNET-PCI-RJ Digital output module

Carefully examine the module and case to see that no damage has occurred during transit. Check that the relay serial number of the module, case cover and resistor assembly (when required) are identical, and that the model number and rating information are correct. CAUTION: If a mechanical flag indicator is fitted, damage is likely to be incurred if the flag indicator/armature assembly of a miniature relay is actuated manually with a screwdriver/probe. Flags should be reset with the cover in position by the facility provided.

Check that the external 

wiring is correct to the relevant relay diagram or scheme diagram. The relay diagram number appears inside the case. Particular attention should be paid to the correct wiring and value of any external resistors indicated on the wiring diagram/relay rating information. If a test block MMLG is provided, the connections should be checked to the scheme diagram, particularly that the supply connections are to the live side of the test block (coloured orange) and with terminals allocated with odd numbers (1, 3, 5, 7 etc.). The auxiliary supply voltage to the scheme should be routed via test block terminals 13 and 15.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

Electrostatic discharge (ESD) 

The relay uses components which are sensitive to electrostatic discharges. When handling the withdrawn module, care should be taken to avoid contact with components and electrical connections. When removed from the case for storage, the module should be placed in an electrically conducting anti-static bag. See full recommendations inside the front cover of this publication.

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/