DURAG D-UG660-20 Power module

DURAG D-UG660-20 Power module

The instructions given enable the detection of faults to sub-assembly level. It is recommended that any fault on the pcb should be rectified by replacement of the complete board. However, if any component is replaced, then the relay must be recalibrated. It is recommended that the module is returned to GEC ALSTHOM T&D Protection & Control Limited for recalibration. Should the need arise for the equipment to be returned to GEC ALSTHOM T&D Protection & Control Limited for repair, then the form at the back of this manual should be completed and sent with the equipment together with a copy of any commissioning test results.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

Repair and replacement of miniature pcb mounted relay 

flag mechanism (where fitted) The miniature relay cannot be repaired. If it is proved to be operating incorrectly, it must be replaced. The flag assembly can be reset, or damaged parts replaced as required. If any part of the flag/relay assembly is disturbed, the settings of the assembly must be checked and adjustments made where necessary.If the trip indication fails then it may be necessary to replace the mechanical flag unit or led indicator pcb depending on which is fitted.

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/