DURAPOINT VP2500 panel

DURAPOINT VP2500 panel

remove the screw holding the side plate to the top plate and remove the side plate. this will reveal the miniature relay and the flag spring. Access is possible through the side of the assembly unless impeded by other components. – remove the 3 screws (2 at the top, 1 at the bottom) holding the printed circuit board to the top and bottom plates. The circuit board, with the miniature relay can not be withdrawn from the flag assembly.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

remove the 2 screws holding the flag spring

clamp plate to the bottom plate. The flag spring can now be extracted from the assembly. Note that the top and bottom plates cannot be removed from the relay front plate without damaging the adhesive name plate, which covers the heads of the countersunk screws holding the top and bottom plates to the front plate. Assembly is in the reverse order of dismantling. Setting up procedure of flag assembly Flag spring units are supplied pre-bent and should need no further adjustment before assembly

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/