ELTEX KNH34 CPU card
No-Load Losses and No
-Load Current The following losses occur at no-load
- Iron losses in the transformer core and other metal parts
- Dielectric losses in the insulation’s
- Load losses caused by the no
-load current Since the last two mentioned losses are relatively very low, they can be ignored. So that the no-load losses are only the iron losses.
Warranty: 365 days Goods status: new/used Shipping method: Courier delivery
Our products
A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components
THE TESTING OF POWER TRANSFORMERS
Because the losses are to be determined under standard conditions, it is necessary to apply a wave shape correction whereby the losses are corrected to correspond to test conditions where the supply voltage is sinusoidal. In case of non-uniform waveform, the effective value of voltage ( U ) is different than the mean value ( U’ ). There is no need for correction, if the voltmeter readings are the same for all. The test voltage wave shape is satisfactory if the difference between readings U’ and U are less than 3 %. The test voltage ( U’ ) is adjusted by the “mean value” voltmeter. Then the hysterisis losses can be measured correctly. But the Eddy-current losses should be corrected.
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/