ENTEK C6660 Digital I/O module
The test voltage is measured with capacitive voltage divider connected to H.V. terminal or the test voltage can be read from the voltmeter through voltage transformer in the low voltage side, which is calibrated with the voltage divider. Another method is to measure the test voltage from the peak value voltmeter, which is connected to the test tap of H.V. condenser bushings. The peak voltmeter indicates the peak value divided by √2. The test duration not being less than 15 seconds is determined by the following formula;
Warranty: 365 days Goods status: new/used Shipping method: Courier delivery
Our products
A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components
Uniformly insulated windings
Test connection is essentially the same as in service, a three phase symmetrical voltage is
supplied. The test voltage is generally twice as the rated voltage. However, the voltage between
line terminals of any winding shall not exceed the rated short duration power frequency withstand
voltage. The tappings of the transformer should be accordingly.
The voltage is measured from terminals to earth or between terminals of the low voltage winding
using precision voltage transformers.
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/