FANUC A06B-6089-H104 Serial control card

FANUC A06B-6089-H104 Serial control card

Maximum Allowable Current Through the Relay Metrosil at the Setting Voltage During normal operation, the relay Metrosil leaks a small amount of current. As the Metrosil is in parallel with the relay, it is important to account for the leakage so the relay operates at the correct voltage/current.Also called Fault Clearing Time. On some relay protection schemes, there may be a longer delay between the fault and the relay operating. If this time is longer than 0.5s, the Metrosil will need to be de-rated.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Identify the relevant tables for the application 

For maximum internal secondary fault currents of up to 50Arms (typically 1A CTs) table 1 applies (see page 3). For maximum internal secondary fault currents of up to 150Arms (typically 5A CTs), table 2 applies (see page 3). The distinction between 1A and 5A devices is based on typical fault current requirements. It is acceptable to use a 1A Metrosil device with a 5A CT or vice versa, so long as the rated secondary fault current is not exceeded and all other parameters are appropriate.

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/