FANUC A06B-6114-H106 Bus expansion card

FANUC A06B-6114-H106 Bus expansion card

From the ’Typical Relay Setting Voltage’ range and ‘Rated Maximum Current’ , identify the recommended Metrosil Type from either Table 1 or Table 2 using columns 2 and 5. Find a relay setting voltage that is close to what you require. If your setting voltage is lower than the example voltages given, the corresponding leakage current will be lower through that device. If required, these values can be more accurately determined in steps 3 and 4. For a 1A CT, decide if a single pole or a triple pole (3-phase) Metrosil type is required.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Check the maximum permissible leakage 

At the relay setting voltage, check that the maximum leakage current for the identified Metrosil type is within the permissible limits of the relay system. This can be done either:- directly from tables 1 or 2, column 3 Or calculated from equation 1, using the minimum value of C for the Metrosil type identified and a value of 0.25 for β

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/