FANUC A20B-2002-0040/07DR Embedded control card

FANUC A20B-2002-0040/07DR Embedded control card

The method of mounting Metrosil relay units will depend on local conditions and available space. To avoid overheating, the following general recommendations apply:- 

• Multiple disc Metrosil units should be mounted with the M12 stud and brackets horizontally 

• There should be approximately 40mm clearance all round the Metrosil unit(s) and live metalwork 

• Where multiple Metrosils are installed, avoid locating them directly above each other 

• Free airflow over the Metrosil must be available

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

ENERGY AND POWER RATINGS 

Table 3 displays the rated energy absorption for each device (or each phase of a three phase device), along with the short time Power rating. Finally the power dissipation represents the cooling rate of a Metrosil device after a surge event, provided it is installed with adequate space and airflow.DESIGN AND DIMENSIONS CAD drawings showing the design and dimensions of a stud mount and bracket mount, 600A/S1 and 600A/S3/P relay Metrosil are shown below. Other drawings are available on request.

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/