FIREYE 65UV5-1000 Overspeed detection module

FIREYE 65UV5-1000 Overspeed detection module

turned off before doing any termination module wiring. Failure to do so could result in equipment damage. Do not apply power until all connections are verified. ATTENTION Il est fortement recommand, que toutes les alimentations (armoire, E/S, etc.) soient coupées avant d'effectuer quelque raccord que ce soit sur un carte de raccordement. Un manquement à ces instructions pourrait causer des dommage à l'équipement. Ne pas rebrancher les alimentations avant d'avoir vérifié tous les raccordements.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

To connect field and power wiring: 

1. Insure the IRL module is pulled out far enough to gain access to the terminal strip.

2. Feed the station wiring into the terminal strip area andconnect them to the appropriate terminals. 

3. Connect an 18 AWG wire from the +24 VDC bus of the termination mounting unit to the +24 VDC terminal of the IRL module. 

4. Connect an 18 AWG wire from the common bus of the termination mounting unit to the common terminal of the IRL module. 

5. Insert the IRL module until it locks securely into place. 

6. Replace (snap on) the front cover.

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/