FIREYE EP160 Temperature monitor module

FIREYE EP160 Temperature monitor module

Label and remove all wiring and cables from the defective IRL module. 4. Remove the defective IRL module from the termination mounting unit. 5. Verify a 1.0 amp/250 volt fuse is installed in fuse clip F1 and the 5.0 amp/250 volt fuse is installed in fuse clip F2 of the replacement IRL module. If not already installed, insert the appropriate fuses into fuse clips F1 and F2. 6. Set the jumpers on the replacement IRL module to match the jumper settings of the defective IRL module. 7. Connect all wiring removed in Step 3 to the replacement IRL module.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

It is strongly recommended that all power 

(cabinet, I/O, etc.) be turned off before doing any termination module wiring. Failure to do so could result in equipment damage. Do not apply power until all connections are verified. ATTENTION Il est fortement recommand, que toutes les alimentations (armoire, E/S, etc.) soient coupées avant d'effectuer quelque raccord que ce soit sur un carte de raccordement. Un manquement à ces instructions pourrait causer des dommage à l'équipement. Ne pas rebrancher les alimentations avant d'avoir vérifié, tous les raccordements

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/