GENERIC 26D023003 Overspeed detection module

GENERIC 26D023003 Overspeed detection module

Follow the instructions below to configure the power supply for remote sensing: 

1. Ensure that Mains switch is on Off position “O” 

2. Remove factory jumpers between +S to + and –S to –. 

3. Using a twisted pair or shielded cable (suggested wire size is 0.3 or 0.5 mm2 ) connect the +S terminal to the positive output terminal and the – S to the negative output terminal as illustrated in Figure 19. 

4. For NGPS with output voltage rating > 60 V Fix the Safety cover to the rear panel using the four M3x8 mm screw.

"Disclaimer"

Temporal Ming sheng automation equipment co., LTD. We sell new products and production of products, features independent channels to buy such products. Temporal Ming sheng automation equipment co., LTD

Is not this website features of authorized distributors, distributors or representatives. All the products on this site to use the name/product pictures, logo, brand name and logo are all the wealth of their respective owners

Production. With these names, pictures, logo, brand name and logo of the product description, description or sales with dry identification purposes only and is not as connected in any way to any right holder or authorization.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Grounding Outputs 

By factory default configuration the NGPS minus terminal is grounded to the Protective Ground (i.e. chassis, Mains-Earth terminal and all metallic parts composing the box) through a fuse. This fuse called Earth Fuse (E.F.) is accessible form the back panel. With this configuration the Output Terminals are not floating and cannot be connected to Protective Ground. If accidentally one of the output terminals is conducting to the Protective Ground a fault will be triggered switching the power supply Off. Refer to Earth Fuse Fault and Earth Leakage Fault.

Our superior products

ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series

BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables

Emerson -- modbus card, power panel, controller, power supply, base, power module, switch

EPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor

FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch

GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card

HIMA --- DI module, processor module, AI card, pulse encoder

Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM card

MOOG - servo valve, controller, module, power module

NI --- Information acquisition card, PXI module, card, chassis multi-channel control card

WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module

Woodward - Regulator, module, controller, governor

YOKOGAWA - Servo module, control cabinet node unit

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/