INDRAMAT KDS1.3-200-300-W1 Relay card

INDRAMAT KDS1.3-200-300-W1 Relay card

Since the output of INDRAMAT KDS1.3-200-300-W1 can be either AC output or DC output, two common terminals are set at each set of output points to facilitate the selection of AC and DC output modes. Since all output points here are used for DC, both common terminals are connected with DC 24VDC. The output points Y2, Y4, Y5 and Y6 control the motor operation status. In order to more accurately reflect the motor operation status, the normally open auxiliary contacts of the motor main control relay are connected in series between the output point and the indicator light.

KDS1.3-200-300-W1 relies on the gravity of the rotor itself to measure the static unbalance. Only applicable to some disk-shaped parts with low balance requirements. The centrifugal balancing machine measures the unevenness according to the bearing vibration caused by the rotor unbalance or the vibration force acting on the bearing when the rotor is rotating.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/