KEBA CP450 KEMRO K2-400 gateway module

KEBA CP450 KEMRO K2-400 gateway module

The CP450 KEMRO K2-400 module controls the CW (clockwise) and CCW (counterclockwise) motors according to the current cabin angle and the measured low frequency average wind direction signal value, as well as the current operation status and load signal of the unit, to realize automatic control of wind and cable unwinding. The main controller communicates with the converter through CANOPEN communication bus. The converter realizes grid connection/disconnection control, generator speed regulation, active power control and reactive power control

CP450 KEMRO K2-400 controls the output electric energy of the generator stator to the same frequency, phase and amplitude through excitation of the generator rotor according to the command of the master control, and then drives the stator outlet contactor to close to realize grid connection; When the generating power of the unit is less than a certain value for several seconds, or when the wind turbine or power grid has an operation fault, the converter drives the generator stator outlet contactor to open to realize the disconnection of the unit.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/