TURCK FDNL-L0800-T Digital input module

Product introduction

TURCK FDNL-L0800-T Digital input module

Mounting a FDNL-L0800-T connector Board Tools and utilities 

ƒ Screwdriver, slotted 0.8 x 4.0 mm 

ƒ Matching connector board To install the connector board 

1. Insert the connector board into the guiding rail with the groove facing upwards (see following figure). Fit the groove into the guiding rail pin. 

2. Place the connector board on the cable shield rail. 

3. Secure the two captive screws to the base plate. 

First screw in the lower than the upper screw. To remove the connector board 1. Release the captive screws from the base plate. 2. Lift the lower section of the connector board from the cable shield rail. 3. Remove the connector board from the guiding rail.

Product extension

SECURITY COMPANY BLL510
GE IC754VGF12CTD
ADEPT 10350-00104
BENTLY 1900/27
SEW 8141649.53
PROSOFT MVI69-PDPMV1
LKB LKB2211 SUPERRAC
ABB UFC921A101 3BHE024855R0101

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

parameter

Product Net Depth / Length:95mm

Product Net Height:320mm

Product Net Weight:1.35 kg

Product Net Width:450mm

Voltage:240V

Made To Order:No

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/