TURCK JBBS-49-E413/3 Power AC module

Product introduction

TURCK JBBS-49-E413/3 Power AC module

This chapter describes how to mount and remove the JBBS-49-E413/3 module. A module can be mounted and removed while the TURCK system is operating. NOTICE Damage to bus and power sockets due to module jamming! Failure to observe this can damage the controller. Always take care when inserting the module in the base plate. 

 Tools and utilities 

ƒ Screwdriver, slotted 0.8 x 4.0 mm 

ƒ Screwdriver, slotted 1.2 x 8.0 mm

1. Open the cover plate on the fan rack: ; Move the locks to the open position. ; Lift the cover plate and insert into the fan rack 2. Insert the top of the module into the hook-in rail, see . 3. Swivel the lower edge of the module towards the base plate and apply light pressure to snap it into place, see . 4. Tighten the screws, see . 5. Pull the cover plate out of the fan rack and close it. 6. Lock the cover plate.

Product extension

SECURITY COMPANY BLL510
GE IC754VGF12CTD
ADEPT 10350-00104
BENTLY 1900/27
SEW 8141649.53
PROSOFT MVI69-PDPMV1
LKB LKB2211 SUPERRAC
ABB UFC921A101 3BHE024855R0101

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

parameter

Product Net Depth / Length:95mm

Product Net Height:320mm

Product Net Weight:1.35 kg

Product Net Width:450mm

Voltage:240V

Made To Order:No

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/