VMIC ASSY 12149 Communication gateway module

Product introduction

VMIC ASSY 12149 Communication gateway module

If interrupts are desired, the appropriate registers in the ASSY 12149 must be initialized through software control. A CSR is also present on the board which controls the Fail LED on the Reflective Memory Board. The user must Write to the CSR after any test software is run successfully on the board in order to turn OFF the Fail LED. There is no automatic diagnostic software on the board to perform self-test function so the LED being ON does not indicate a failure on-board unless the VME chassis software control actually has turned it ON. LED ON is a standard power-up mode for the Fail LED. If the output FIFO becomes over half full, the Reflective Memory Board will issue an interrupt if the BIM has been programmed and enabled. The user software may choose to ignore this warning. If the output FIFO becomes completely full, a Bus Error (BERR) will be issued to the user once an attempt is made to Write to a Reflective Memory Board that has a full output FIFO.

Product extension

HIMA HIMA 4135A
Reliance 61C350
SAMS0N 45-4
EMERSON 38B5786X092
Honeywell ASW454
ELAU DB-5

ABB RER133
AB 2094-BM01-S/C
GE IC695ALG708
GE IC695ALG616

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

parameter

Product Net Depth / Length:95mm

Product Net Height:320mm

Product Net Weight:1.35 kg

Product Net Width:450mm

Voltage:240V

Made To Order:No

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/