Product introduction
DEIF LMR-111D Speed module
The location for installing a DEIF LMR-111D must be chosen observing the operating requirements (see Chapter 3.3) to ensure a smooth operation. Observe the following points: Mount the subrack on horizontal DIN rails to ensure effective cooling. A distance of at least 100 mm above and below the subrack must be maintained. Do not mount the subrack above heating equipment or any heat source. Only mount the controller with unconnected connectors. To mount the modules and observe the maximum operating temperature, follow the instructions specified in the HIMatrix Engineering Manual (HI 800 101 E).
8.1.2 Mounting on a Flat Base The DEIF LMR-111D is equipped with two perpendicular joint bars each of which has two oblong holes for fastening. These joint bars must be secured on a flat base. The mounting bolts must not exceed 6 mm in diameter and 13 mm head diameter. The screws and the selected base must be suitable to hold the weight of the controller.
Product extension
PILZ 301120
LAETUS LLS570-05
GE 469-P1-HI-A20-E
BENTLY 3500/50-01-00-01
ABB LDGRB-01 3BSE013177R1
A-B 2094-BM02-S/B
ETHERWAN EL100T
XYCOM XVME-660/716
ULTRA SLIMPAK G448-0002
Superior products
Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts
parameter
Product Net Depth / Length:95mm
Product Net Height:320mm
Product Net Weight:1.35 kg
Product Net Width:450mm
Voltage:240V
Made To Order:No
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/