Product introduction
DEIF RMP-121D Thermal resistance module
Although the RMP-121D Reflective Memory Board is software transparent on power-up, some registers are present to facilitate user information and interrupt generation. Table 4.1-1 shows the memory mapped registers used by the RMP-121D.
4.2 BOARD IDENTIFICATION (ID) REGISTER The Board ID Register allows the user to verify the presence of the Reflective Memory Board at the correct address. The RMP-121D Board ID number is $18 HEX.
4.3 NODE ID REGISTER A value from 0 to 255 can be read from this byte. The value read corresponds to the node ID jumper selected for the board.
Fast mode transmits each data transfer once on the fiber-optic link. If the jumper J5 is installed, each transfer is sent twice on the fiber-optic link (3.2 Mbytes/sec). BIT 1 - Mask Transfer Error Interrupt Masks on high (Read Only) If the mask jumper J3 is installed and INT0 is enabled by software on the bus interrupt module, an interrupt will be generated each time a receive error is detected on the fiber-optic link.
Product extension
ABB AO2000-LS25
GECMA 15I-2-FMO
ABB PM864AK01
ETHERWAN EMC400-EPWS
Honeywell C7012E1104
BALZERS IKR020
DELTA TAU PMAC-2 ACC8E
METSO PDP403
BENTLY 149986-01
MOTOROLA MVME2400
KOLLMORGEN SERVOSTAR 310
Superior products
Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts
parameter
Product Net Depth / Length:100mm
Product Net Height:330mm
Product Net Weight:1.50 kg
Product Net Width:455mm
Voltage:240V
Made To Order:No
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/