GE TP2020SS RMS-9 Output card

Product introduction

GE TP2020SS RMS-9 Output card

TP2020SS RMS-9 contains the node ID of the node to receive the interrupt sent by writing the command register. This register must be set at the same time by using a 16-bit word write to both command register and command node or prior to writing the command register. Table 4.7-1 shows node ID patterns.

The three interrupt FIFOs are 512 bytes deep so up to 512 interrupts of any level may be queued in the FIFO. A clear function is executed upon a Write to the int ID Register so an interrupt level that has been masked off for some time and contains many global or local interrupts previously sent may be cleared out without servicing them. Only new interrupts received will be serviced. Since the interrupts originally go through the same receive FIFO as data, all data sent before the interrupt will be present in the local node’s memory before the interrupt is issued to the local node.

Product extension

A-B 80026-044-06-R
kongsberg RMP420
BENTLY 130539-30
KOLLMORGEN S21260-SRS
Woodward 2301E 8273-1011
BENTLY 3500/22M
REXROTH MSK076C-0450-NN-M1-UG1-NNNN
ABB XO08R2
POTTER & BRUMFIELD SDAS-01-7Y2S1024

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

parameter

Product Net Depth / Length:100mm

Product Net Height:330mm

Product Net Weight:1.50 kg

Product Net Width:455mm

Voltage:240V

Made To Order:No

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/