Detailed information
YASKAWA CP-317/AI-01 Vibration card
CP-317/AI-01 contains the state of the Timers OUT pin. This allows viewing of the Timer’s OUT pin via software. Bit D6 indicates when the count written to the Timer is actually loaded into the Timer register. The exact time of the loading depends on the mode the Timer is in and is defined in the “Mode Definitions” section. The count cannot be read from the Timer until it has been loaded. If a count is read before this time, the value read will not be the new count just written. Refer to Table 4-11.
The Timer Latch Command allows the reading of a Timer ‘on the fly’ without affecting the timing in process. Like a Control Word, the Timer Latch Command is written to the Control Word Register (I/O Address $503, see Table 4-1). The Select Timer bits (ST1, ST0, see Table 4-3) select one of the three timers while the Read/Write bits (RW1,RW0, see Table 4-4) select the Timer Latch Command, RW1 = 0 and RW0 = 0. The selected Timer’s count is latched into the 0L registers at the time of the Timer Latch Command. The count is held in the 0L latches until it is read. Multiple Timer Latch Commands can be used to latch more than one Timer. Again, each Timer’s count is held latched until it is read.
• Contact: manager ye
• E-mail: yvonne@stockdcs.com
• Telephone: +86 15270269218
NI PCI-5421
ABB DSQC355A
DEIF EPQ96-2
PACIFIC 6410-007-N-N-N
FOXBORO P0912XX
ELAU ISH070/60017/0/0/00/0/00/10/00
SHINKAWA VM-5G0-2
ABB PPC905AE101
Sartorius MDB-8E
Company Profile
Ruichang Mingsheng Automation Equipment Co., Ltd. was founded on April 2, 2021, with its registered address at No. 401, Saihu Nong Mall, No. 23, Dongyi Road, Ruichang City, Jiujiang City, Jiangxi Province, and its legal representative is Zhou Zuochen. The business scope includes licensed items: road goods transportation (including dangerous goods), technology import and export, goods import and export, urban distribution and transportation services (excluding dangerous goods) (items that must be approved according to law can only be operated with the approval of relevant departments) General items: sales of industrial automatic control system devices, electrical equipment, mechanical parts, spare parts, computer software and hardware and auxiliary equipment retail, Computer software and hardware and auxiliary equipment wholesale, electronic components wholesale, packaging services, general goods warehousing services (excluding hazardous chemicals and other items requiring licensing and approval), information consulting services (excluding licensing information consulting services) (in addition to licensing business, can independently operate projects not prohibited or restricted by laws and regulations)
Main business
ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series
BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables
Emerson -- modbus card, power panel, controller, power supply, base, power module, switch
EPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor
FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch
GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA --- DI module, processor module, AI card, pulse encoder
Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG - servo valve, controller, module, power module
NI --- Information acquisition card, PXI module, card, chassis multi-channel control card
WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward - Regulator, module, controller, governor
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/