The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

IS200TDBTH6ABC Control card

Application and overview The MTR-4 is intended for measuring and monitoring single-phase or three-phase electrical power network. The MTR-4 measures RMS values by means of fast sampling of voltage and current signals, which makes the instrument suitable for acquisition of transient events. A built-in microcontroller calculates measurements (voltage, current, frequency, energy, power, power factor, THD phase angles, and so on) from the measured signals. Features • Measurements of instantaneous values of more than 50 quantities (V, A, kW, kVA, kvar, kWh, kvarh, PF, Hz, MD thermal, THD, and so on) • Power accuracy class 0.5 (0.4) • Serial communication, RS-485 up to 115,200 bit/s optional • Modbus communication protocol • Up to four analogue outputs or two relay outputs • Single wide auxiliary power supply range 20 to 300 V DC, 48 to 276 V AC (tolerances included) • Automatic range of nominal current and voltage (max. 12.5 A and 600 V L-N) • Housing for DIN rail mounting • User-friendly configuration software Safety requirements for electrical equipment for measurement, control and laboratory use EN 60688 Electrical measuring transducers for converting AC electrical variables into analogue and digital signals

Application 

The MTR-4 multi-function transducer is used for measuring and monitoring all single-phase or three-phase values. The range of I/O modules makes MTR-4 a perfect choice for numerous applications. MTR-4 supports standard serial communication RS-485 with speed up to 115,200 baud, which is perfect for simple applications and serial bus interfacing. Additional USB 2.0 interface can be used for a fast setup without need for auxiliary power supply. This interface is NOT galvanically separated from power input and can be used ONLY unconnected to power inputs. The variants with relay output is an easy shortcut to bring your existing wind turbine application in compliance with the GL demand for redundant power measurement. Programming The MTR-4 multi-function transducer is completely programmable by M-Set utility software. Primary-secondary ratio (U, I), energy counter, input and output values are all programmed by setting software on the USB or the RS-485 communication. It is possible to choose between several standard output value ranges (100 to 0 to 100 %):