RELIANCE 0-54339-6 Sequential control module

RELIANCE 0-54339-6 Sequential control module

0-54339-6 specify the multiplier between the input shift clock rates (TxC (active low) and RxC (active low)) and the data rate. The same multiplier is used for both the transmitter and receiver, although the input clock rates may be different. In x16, x32 and x64 clock modes, the receiver start bit detection logic is enabled; therefore, for synchronous modes, the x1 clock rate must be specified. Any clock rate may be specified for asynchronous mode; however, if the x1 clock rate is selected, synchronization between the receive data and the receive clock must be accomplished externally.

When 0-54339-6 is set to a "one", the transmitter output is connected to the receiver input and TxC (active low) is connected to the receiver clock. RxC (active low) and RxD pins are not used by the receiver; they are bypassed internally. RxC (active low) may still be used as the Baud Rate Generator (BRG) output in loop mode.

Advantage products

ELAU C600/10/1/1/1/00 
NI PXIE-8840QC 
ABB CI858 3BSE018136R1
MOOG M128-010 M128-010-A001B 
ABB PFEA112-65 3BSE050091R65 
Honeywell CC-TAIX01 
Honeywell CC-TDIL01 
Honeywell CC-TAOX11
Honeywell CC-TDOB11 
Honeywell CC-TCF901 
Honeywell CC-MCAR01 
Honeywell CC-MCAR02

MOOG D136-001-007 
YASKAWA JANCD-XCP01-1 
YASKAWA CPS-150F 
YASKAWA JZNC-XIU01B 
Honeywell CC-IP0101 
GE VMIVME-7750 VMIVME-7750-734001 350-027750-734001 K

Advantage brands:

 ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

Please contact yvonne@stockdcs.com for the best price

sales manager: manager ye

email mailto: yvonne@stockdcs.com

Skype/WeChat:15270269218

phone/Whatsapp:+ 86 15270269218

QQ:3005425193

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/